Winterization Service
Protect your irrigation investment from harsh Connecticut winters. Our high-pressure blow-out service removes all water to prevent freeze damage.
Book Early: Winterization should be completed before the first hard freeze, typically by late October in CT. Schedules fill quickly!
Why Winterization is Essential
Freeze Damage Prevention
Water left in pipes expands when frozen, cracking pipes, fittings, and sprinkler heads.
Backflow Preventer Protection
These expensive components are especially vulnerable to freeze damage.
Cost Savings
Winterization costs a fraction of what you'd pay to repair freeze damage.
Peace of Mind
Know your system is protected all winter and ready for spring.
Our Winterization Process
We use commercial-grade air compressors to thoroughly remove all water from your irrigation system:
- 1Shut off water supply to the irrigation system
- 2Open manual drain valves at low points
- 3Connect commercial-grade air compressor
- 4Blow out each zone until no water visible
- 5Repeat for all zones (typically 2-3 passes)
- 6Disconnect and drain backflow preventer
- 7Shut down and protect controller
- 8Schedule spring startup appointment
Schedule Your Winterization
Connecticut's first hard freeze typically arrives in late October or early November. We recommend scheduling your winterization service by mid-October to ensure availability.
Pro Tip: When you schedule winterization, we'll automatically book your spring startup appointment for next year.
Winterization FAQs
Can I winterize my own system?
While some homeowners attempt DIY winterization, we don't recommend it. Consumer-grade compressors typically can't generate enough pressure for complete water removal. Incomplete winterization can result in costly damage.
What happens if I skip winterization?
Water left in pipes, valves, and heads will freeze and expand, potentially cracking these components. Repairs can cost hundreds or even thousands of dollars—far more than annual winterization service.
How long does winterization take?
Most residential systems take 30-60 minutes to winterize properly, depending on the number of zones and complexity of the system.